Peavey  XR1220 (used)

Peavey XR1220 (used)

The new XR 1220 and XR 1212 are based on dual 600-watt, class D power amplifiers that can be configured into five operating modes: Left & Right; Left & Right with Subwoofer; Main & Monitor; Main & Monitor with Subwoofer; and Monitor 1 and Monitor 2. The power amps deliver 600 watts to each side in all modes, and those modes with subwoofer option have a built-in fourth-order crossover that sends all frequencies below 100 Hz to the sub output and everything above 100Hz to the internal power amps.

Each standard channel includes an XLR input and ¼” line input, as well as a ¼” channel insert, gain adjustment, 80 Hz low-cut switch, two monitor sends, EFX send, and 4 band EQ with low, low mid (set at 450Hz to improve clarity), high and Peavey’s proprietary Mid-Morph™ equalization controls. Mid-Morph improves the sound no matter which direction the knob is turned. When the control is turned to the left it cuts 2KHz but when turned to the right it boosts 4KHz.

The master section features digital nine-band graphic EQ for both output amplifiers, with a built-in Real-Time Analyser that analyses the room and sets the EQ curves automatically when a microphone is connected to its XLR input. The master section also includes Peavey’s exclusive Feedback Ferret® digital feedback elimination and a digital effects section that includes a range of reverbs, delays and chorus with preset storage. The dual auto-EQ and Feedback Ferret can be assigned to two outputs—left and right, main and monitor, and monitor 1 and 2.

Feedback Ferret applies sophisticated, narrow “smart” filters that find and suppress offending frequencies through virtually instantaneous notching with incremental attenuation to eliminate the feedback. The algorithm continuously checks and rechecks the problem frequencies and then releases the filters when it no longer detects feedback.



  • 20 XLR mic channels
  • dual 600-watt, lightweight Class D amps (4 ohms)
  • Dual nine-band GEQ with Auto EQ
  • five power amp modes, including fully active subwoofer crossover
  • patented Feedback Ferret® digital feedback elimination
  • four-band EQ with Mid-Morph technology
  • digital effects
  • rack mountable
  • two monitor sends
  • real-time Analyzer
  • dedicated effect return fader
  • one Neutrik® Speakon® combo per amplifier
  • Dimensions (HxWxD): 5.5'' (140 mm) x 16.5'' (419 mm) x 17'' (432 mm)
  • Weight: 18.4 lbs (8.4 kg)
Product Reviews
No Reviews For This Product.
Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout
  recently viewed

      Opening Times
     Mon   closed
     Tue    10.30 - 5.30
     Wed   closed
     Thur   closed
     Fri      10.30 - 5.30
     Sat     10.30 - 5.00

     Sun & Bank hols -